DSpace Repository

Use of chitosan adhesive for the manufacture of corrugated fibreboard

Show simple item record

dc.contributor.author Srinivasa Gopal, T.K.
dc.contributor.author Thankamma, R.
dc.contributor.author Ramachandran Nair, K.G.
dc.contributor.author Prabhu, P.V.
dc.contributor.author Madhavan, P.
dc.date.accessioned 2017-12-13T09:43:02Z
dc.date.available 2017-12-13T09:43:02Z
dc.date.issued 1991
dc.identifier.citation Fish Technol.28(2): 154-157 en_US
dc.identifier.uri http://hdl.handle.net/123456789/3102
dc.description.abstract Peeling strength of kraft paper-kraft paper and kraft paper- corrugated fibreboard (CFB) bonded using 1.5% chitosan in 1% acetic acid of viscosities 20, 130 and 500 cp and starch were compared. The peeling strength between kraft paper-kraft paper and kraft paper corrugated fibreboard was same in both starch and chitosan (1.5% and 130 cp viscosity) adhesive. The frozen storage behaviours of 5 ply corrugated fibre board prepared using 1.5% chitosan of viscosity 130 cp and starch solution having 10% solids were studied. The bursting strength, puncture resistance and flat crush strength were reduced during storage, but the amount of reduction was more in CFB using starch based adhesive. The starch based adhesive board delaminated on immersion in water while chitosan based adhesive board did not delaminate. CFB using chotosan adhesive had more compression strength than the starch adhesive CFB. en_US
dc.language.iso en en_US
dc.publisher Society of Fisheries Technologis(India) en_US
dc.title Use of chitosan adhesive for the manufacture of corrugated fibreboard en_US
dc.type Article en_US

Files in this item

This item appears in the following Collection(s)

Show simple item record

Search DSpace

Request Article


My Account